This is the perfect tool to identify moisture problems in EIFS (Exterior Insulated Finish System).

The EIFS Inspection Kit is the only moisture inspection kit that will give the inspector key information necessary to conduct moisture inspection surveys in EIFS Inspection Protocols.

Delmhorst BD-10 Inspection Kit is the perfect tool to identify moisture problems. The BD series moisture meters utilize insulated contact pins to penetrate through the cladding and determine the condition of the sheathing.

Protimeter Surveymaster & Free Moisture DVD is a dual-function, non-invasive and pin moisture meter

Delmhorst Check Moisture Meter is a two-in-one moisture meter that scans and locates the source of moisture!

Delmhorst Moisture Check Insulation Moisture Meter Kit is a two-in-one moisture meter that scans surfaces and determines if moisture is present. Use the pin-mode to identify if moisture is present in insulation behind sheetrock.

Delmhorst Moisture Check EIFS Moisture Meter Kit is a two-in-one moisture meter that enables you to identify problem areas in EIFS by quickly scanning large areas. Use the pin-mode to locate the exact source of moisture.

Delmhorst Moisture Check Complete Moisture Meter Package enables you to identify moisture conditions by quickly scanning large areas. Use the pin-mode to locate the exact source of moisture.

The RWS incorporates two of Tramex's well-known moisture scanners, the Leak Seeker for Roofing, and the Wet Wall Detector for EIFS, incorporating all the benefits and features of both these time proven instruments into this one instrument.